Whats the best tile blade for wet dry cuts

[Balloo]

Guys what is the best blade for not chipping and for perfect cuts wet or dry

 

[Dumbo]

Now there's a question we would all like the answer to

 

[Italy]

simple, it does not exist.

 

[kevsalt]

marcrist ck750 ...think its only a wet blade though....best ive used

 

[One Day]

And the saw / grinder quality is critical too.
A Sigma 10m9 or Raimondi GS86 with no wobble on the motor or spindle will always cut far cleaner than a saw with a wobbly motor/spindle.

 

[Balloo]

And the saw / grinder quality is critical too.
A Sigma 10m9 or Raimondi GS86 with no wobble on the motor or spindle will always cut far cleaner than a saw with a wobbly motor/spindle.

and there is another question sigma or raimondi wet saws , which is better

 

[Old Mod]

Depends on how deep your pockets are and what you want it for.

 

[Balloo]

For quality

 

[Old Mod]

High horse power and belt drive over direct drive,
and more importantly a good quality blade.
But a lot of blades now are more material specific, go to the Montolit website and view their blades, they have some very high end and excellent cutting blades. But they’re generally material and job specific.
Personally, if I have around 2 dozen blades, and they’re all very different in different situations.
They may work on one brand very well, but even when it’s exactly the same tile, if the batch is different, suddenly it won’t give a clean cut.
It’s a minefield, and as everyone has said above, it’s our holy grail, all you can do is find the one that works best on that tile, that day!

 

[kevsalt]

the rubi j slot is another good blade ..cuts very neat on porc ..life span aint bad either