just finished laying a travertine floor today, all washed off and sealed ready for grouting , just noticed theres a pop in the tile where its been honed and filled, wasnt the greatest travertine , what can i use to fill it , to save me lifting it, cheers
Masking tape all round the hole you are going to fill, mix the glue but make sure you don't get any on any other part of the tile (it will shine)
Use a flexible filling knife & remove tape after a minute, roughly, before it goes hard.
You shouldn't need to touch it after its cured, it dries very quick.
I would use a spare tile as a tester & see what your doing first.
Fill it, wait for it to almost harden and use a razor blade to flush it up. It shouldnt need much more than that but you could use a bit of wet and dry.
Reply to what to use to fill hole in travertine in the Canada Tile Advice area at TilersForums.com
I am looking for 1 wickes Mississippi grey tile - damaged 1 tile in my kitchen and they have been discontinued 😭😭 looked everywhere online - wondered if anyone could help😞
https://www.tilersforums.com/threads/shower-bath-tiling-preparation-plaster-and-wooden-windowsill.83462/#gsc.tab=0
There was some heated argument in the above thread! I don't have much...
Hello,
I am a noob trying to tile our shower. Since the old tiles were taken off, some of that wall material has been taken off as well, so everything had to be smoothed. After smoothing with some...
This is the Brilliant Tiling Advice Provided and Peer-Reviewed via 1000’s of Tilers Discussion Thread
How do you know Tiling Advice is Trusted? When its peer reviewed and treated scientifically...
This is the A Friend of ours, UK Tiling Forum, is worth a mention for sure Discussion Thread
We have this Tile Blog here, and a few other websites lets say. We will be adding to the blog during...