What is the hardest tile you have came across to cut?

[Italy]

Shepherd

yes, little shepherd

 

[Blunt Tool]

yes, little shepherd

Should have stuck to his sheep and not made tiles no one can cut!

 

[Italy]

Should have stuck to his sheep and not made tiles no one can cut!

Do not complain !!!
Change the cutter !!!

 

[Blunt Tool]

Do not complain !!!
Change the cutter !!!

What change from Sigma?

 

[Blunt Tool]

All walls tiled now anyway just floor to do tomorrow

 

[Italy]

What model do you use?
How many years to?
Wheel, how long?

 

[Tile Shop]

viper, is no good for 20mm.
You need a blade, which downloads quickly, debris.
Otherwise it will heat up. I can only tell you what he told me montoit.
size?

ND 200 so 200mm blade...... 600x600x20mm tile. It worked and it was fairly neat. but did struggle.... took a good few minutes but didn't count how many. The battipav I did in 3-4 passes with the Battipav 300 fast-cut [serrated] wheel.

 

[Blunt Tool]

3bm only last year, blade 2 months and new one in yesterday

 

[Italy]

3bm only last year, blade 2 months and new one in yesterday

Max handle?
Is too small for those tiles.
you need more strength engraving.
At least 75cm, with max or klick klock.
Take the grinder, faster.

 

[Italy]

ND 200 so 200mm blade...... 600x600x20mm tile. It worked and it was fairly neat. but did struggle.... took a good few minutes but didn't count how many. The battipav I did in 3-4 passes with the Battipav 300 fast-cut [serrated] wheel.

Some cuts, I used sigma 100cm.
(The easier ones).
The rest, with montolit tcs 115, clean cuts.
Or montolit txn 115, faster, but not clean cuts.
I posed, 40x100x 20mm, I think .... ahaha
I do not remember anymore.