wet room shower base former recommendations - TilersForums.com

[J Sid]

ok plumbers (heating engineers) or fellow tilers a question.
what pre formed wet deck would you recommend to go in a wet room with wet ufh that will not reduce the heat compared to the rest of the room which will have 18mm ply on it?
Will be tiled

 

[One Day]

You're pretty much stuck with grp. I'd suggest Impey but using kerdi coll and kerdi membrane instead of impeys effort of a membrane.

 

[hmtiling]

You're pretty much stuck with grp. I'd suggest Impey but using kerdi coll and kerdi membrane instead of impeys effort of a membrane.

not a fan of water guard then imp?

 

[Qwerty]

I quite like waterguard. Better than the old devils fly paper!!!

Impey would be my choice of former for that scenario

 

[J Sid]

You're pretty much stuck with grp. I'd suggest Impey but using kerdi coll and kerdi membrane instead of impeys effort of a membrane.

that's what the interior designer has quote but didn't like the sound of it so rang impey tec and was told the surface temp of the tray would be lower then the rest of the floor and advised electric ufh on tray.

 

[J Sid]

I quite like waterguard. Better than the old devils fly paper!!!

Impey would be my choice of former for that scenario

I like the waterguard

 

[hmtiling]

Me too

 

[J Sid]

so good you said it twice Harry.

 

[One Day]

I like the waterguard

I've not used it yet. I try to avoid Impey where I can, but recently had to deal with 12 of them and they came with the old tar on a roll which I just chucked in the skip.

 

[J Sid]

I've not used it yet. I try to avoid Impey where I can, but recently had to deal with 12 of them and they came with the old tar on a roll which I just chucked in the skip.

would do the same, but the water guard is a different product all together. Easy in comparison