O
One Day
The way I understand it, they had two options:
1) Get a restraining order on him
2) Give him a job
Tilers Forums Official Sponsors
The way I understand it, they had two options:
1) Get a restraining order on him
2) Give him a job
O
Old Mod
My Daughter did one for the partner of Thermonet. He installed it Ill get a picture, it will make you laugh, but works
D
Dumbo
Had a quick look today but couldn't find in booklet where they said it was suitable
But customer told me she was sold it for this purpose so called vario pro (vp) who emailed me some fitting instructions for the wall .
You have to use separate cable for the wall as you are meant to keep vp cable 60 mm from the edge of surface be it a wall or floor and also they don't like the tight radius turn it would have to do between wall and floor .
O
One Day
Yes, but I shouldn't have.
I had WAY too much cable on a job (using Ditra Heat) and ran it onto a wall with spare matting.
I chased back into the wall to give a softer bend on the cable.
This was before I found out Schluter did it.
Not done any since...
F
Flintstone
Looking good. I am keen to do one, I have a job in the pipeline which I may try and incorporate. I saw on thermogroup Instagram page they had what looking like a regular mat version on a wall and they said it was for that purpose!
D
Dumbo
The membrane went up well and once you've done that your 3 parts there . Just got to figure how to turn the room on its side to latex it .
Sorry wasn't vary pro but another they sell. They like to experiment ! 
There are similar tiling threads here
Featured Threads
-
- F
- W
-
- I
-
-
-
