Tiling on/around an inpection chamber access cover

[Unregistered]

I will shortly be undertaking a renovation at home to revamp a utlity area, the snag I have is that in the middle of the floor there is a 650 x 500 inspection/access cover. I need to level the floor before tiling it & obviously cannot tile over the inspection cover, but is there a product or a replacement cover on the market that will allow me to raise the height to tile up to & around it or a recessed lid that can be tiled into & if so where can I buy it? Thanks in advance all advice gladly accepted.
cheers
Karl

 

[Scott]

You can use the block paving ones and tile into it. 🙂

 

[Andy Allen]

do you mean like this.

 

[Unregistered]

View attachment 23446

do you mean like this.

I cannot open the image, do I need to register to be able to do this?
Thanks

 

[Unregistered]

Andy, I cannot view/acess the image, do I have to be registered to do this?
cheers

 

[dilz000]

Where u get them from andy?

 

[Deleted member 9966]

I cannot open the image, do I need to register to be able to do this?
Thanks

yes, please register and you'll have full access to the open forums.

 

[Knight on tiles]

Yes Andy, that looks exactly like what I need for the project, what are they called, where can I get one & how much are they? Thanks

 

[Andy Allen]

its just an infill manhole cover and you can get them from any builders merchants

 

[doddy41]

They are called recessed manhole covers

 

[Knight on tiles]

Many thanks, I will take a trip to my local merchants & sort one out.
Cheers for the advice

 

[White Room]

You will need to screed in the tray but only allow the depth of the tile and addy.

 

[saveloy]

Make sure that you buy a double seal cover. It has to be to comply with building regs. This will stop nasty smells rising from the drain. A normal block paving or recessed cover is not suitable for internal use.