Tile Master PrimePlus Flexible Primer Peeling Off Plaster Skim

[Gazzer]

Good feedback for Tilemaster

 

[Mark@Tilemaster]

All part of the service Chris. Thank you for your comments

 

[Andy Tiler]

All part of the service Chris. Thank you for your comments

Now get back in your office

 

[Lee@emctiles]

Sorry, only just seen this thread as I've been away, seems Mr Kelly has already sorted it 🙂

 

[tobins tiling]

Tilemaster are always willing to help, mark has helped me out with a few problems I've had lately and also gave me his number if I needed any more advice. Great service. Oh also mark if you look on jotm that is the pool I was talking to you about a few weeks back that you supplied the adhesive for thanks again mate

 

[Ajax123]

Sorry, only just seen this thread as I've been away, seems Mr Kelly has already sorted it 🙂

Passed a punter your way for some Anhyfix on Thursday lee. Job in Mansfield. By the way the mrs didn't like the tile samples.... Back to fricking square one. Do you want me to drop them back in when I'm passing...

 

[Dougs Third Go]

I had the same problem first time I used it on skimmed plaster. Now I use 2 diluted coats at 3 parts water to 1 part primer.

 

[Dougs Third Go]

oh, and I rang Mark, and yep, service was spot on

 

[chrisb1357]

Evening all,

Well I have sanded the surface down, cleaned off with a brush and applied a 1 Part Primer to 3 Parts water to a small test area. Still looks like its sitting on the top of plaster and not soaked in but needs a bit of time to dry

Chris