Spacer Size For Large Tiles

[mmmadman]

Hi all

What's the best spacer/gap size for large ceramic travertine effect wall tiles 300 x 450mm and floor 300 x 300mm, or is it persnal preferance I was going to go with 2mm.....???

Cheers.......:smilewinkgrin:

 

[united]

British standards state a min of 3mm floor and 2mm wall (correct me if I'm wrong)

It is personal preference but I would go 3mm floor and 2mm wall

 

[Glasnevintiling]

yeh depends but 2 mm on walls and 3 mm on floors 2 mm on floors as well i use really your preference 🙂

 

[diamondtiling]

2mm for me as well, although I have just been to a job this morning where they used about 8mm..............a full rip out will commence next week.

:mad2:

 

[Glasnevintiling]

8mm lol lol that's crazy chancers around the place

 

[jay]

2mm for me as well, although I have just been to a job this morning where they used about 8mm..............a full rip out will commence next week.

:mad2:

what were they laying bricks:lol:

 

[chris.tiling]

Go with the 2mm / 3mm options. Anything bigger looks nasty in my opinion

 

[grumpygrouter]

Grout joint size is a personal preference and BS min sizes recommendations are there for a reason. IMO joints of the same size can look different on tiles of the same size depending on the tile style and pattern. Lay out a few dry with different joint sizes and see which please your eye most.

 

[david campbell]

as above its preference,i prefer 2mm on concrete or suitable substrates but on square edged tiles 3mm can still look good and neat