Slate Tiling ufh

[morgan4367]

Hi every one
Going to qoute a job tomorrow, slate tilng with ufh on a conservatory floor. Do i lay a self leveller over the matting, and is a single flexible adhesive sufficient. Any other advice would be most helpful. Thanks Tony

 

[White Room]

Before you self level the ufh mat make sure fix the wire down with some addy or tape...the slc can creep under the wires and lift them slightly which won't help when you start fixing the tiles.

 

[Andy Allen]

whats the substrate ?

 

[peteablard]

Before you self level the ufh mat make sure fix the wire down with some addy or tape...the slc can creep under the wires and lift them slightly which won't help when you start fixing the tiles.

I always take extra care to make sure the matting is fixed down securely, I've seend UFH almost floating on SLC which also means there's a chance of damaging the wire with your trowel..... not good!

 

[White Room]

A builder done one for me once, heaven forbid:yikes:

 

[doug boardley]

this is how I do it on a concrete substrate, in the first pic you can see the ufh wires under the slc, which in turn is on top of insulation boards

 

[morgan4367]

Thanks for the responses, can i lay the slate tiles striaight onto the tiles with out putting putting down a self leveller.

 

[White Room]

Thanks for the responses, can i lay the slate tiles striaight onto the tiles with out putting putting down a self leveller.

Do you mean the ufh mat ??

 

[The Legend; Phil Hobson RIP]

As Beam, I think you meant ufh mat. I would not advise tiling directly onto ufh, much better to slc first, imo

 

[doug boardley]

Have you thought about using a de-coupler too?