Roller for uncoupling

[Kyle Knowles]

I have used tm matting on a job once where supplied by customer . I didn't like it's stretchy nature I'm just wondering why somebody would use this instead of other flat matts like bal rapid Matt or codex

When I first used the TM mat I hated it I wanted to run my self over just as a excuse to get out of doin the job but now I've got the technique down I dont mind it at all

 

[Just Rizzle]

i use a spiked roller to press the mat into the addy

 

[Blunt Tool]

i use a spiked roller to press the mat into the addy

Hope it wasn't in a tanking area!

 

[Just Rizzle]

Hope it wasn't in a tanking area!

spiked roller is what i use to air rate leveling compounds to get them level and flat

 

[CJ]

Is that one of the really heavy ones Colin, 50kg's
Or so?

Is that one of the really heavy ones Colin, 50kg's
Or so?

Not sure tbh.......wouldn't want to lift it though. Lol

 

[GAZ5518]

Just used this to put down some bal mat... Certainly pushed it home for a good fix .. Was suitably impressed .. Did the edges with an old laying on growl...But can be a little messy at the joints.. Just kept the roller clean with a sponge...

 

[Dumbo]

Just used this to put down some bal mat... Certainly pushed it home for a good fix .. Was suitably impressed .. Did the edges with an old laying on growl...But can be a little messy at the joints.. Just kept the roller clean with a sponge...


View attachment 88764

I have used that but would prefer something standing up .

 

[Flintstone]

Tape it to a broom handle

 

[GAZ5518]

I have used that but would prefer something standing up .

I'm only 2ft tall!!

 

[Kyle Knowles]

Raimondi make a stand up roller u weight with tiles or adhesive