no more ply

[Spud]

i ordered a pallet of 6mm no more ply today anyone got any feedback on this product got a better price than my usual hardibacker price

 

[united]

I really like using it, it's easy to cut and they glue is mega strong too

 

[Spud]

i had a chat with the technical guy who told me that when sticking it down with spf rapid set both sides need priming with sbr bond primer to avoid curling

 

[Gazzer]

Its good stuff Gary, been using it for years with no problems. Glue is really good, screws are good too....if you source any better screws let me know.
I put at least double the screws in and probably more glue on each board than they say though.

 

[Gazzer]

i had a chat with the technical guy who told me that when sticking it down with spf rapid set both sides need priming with sbr bond primer to avoid curling

yep i was told that too when i used it on a screeded floor with UFH

 

[united]

Its good stuff Gary, been using it for years with no problems. Glue is really good, screws are good too....if you source any better screws let me know.
I put at least double the screws in and probably more glue on each board than they say though.

I have always used more glue and screws than recommended, I know a local bathroom company who use one tube of glue per board :yikes: That's a bit over the top IMO but each to their own

 

[DHTiling]

How much are the tubes of glue.. sounds like a costly install..?

 

[White Room]

Round my way they charge about a tenner for a tube of glue

 

[DHTiling]

:yikes::yikes:

 

[Gazzer]

How much are the tubes of glue.. sounds like a costly install..?

£6.99 + vat