my laser level has died

[cam_low]

My laser level has decided to die...so now I am in the market for a replacement.

What is out there now these days. My budget is irrelevant as I will always buy quality items that will last.

Cheers peoples !

 

[Ian]

Have you turned it off and back on again? [emoji23]

 

[CJ]

Put new batteries in it.

 

[Chalker]

I have the dewalt dw088k, I can't fault it. Screw bracket to door frame and your off.
I know a 360 rotating one is better, but a bit overkill for average rooms.

 

[m3fitter]

I have the Rubi, comes with adjustable bracket that screws and has magnetic clips. vertical, horizontal, and square lines x 2. well recommended

http://www.rubi.com/products/en-UK/...nivelacion-laser-profesional/rubilaser-l4.php

 

[cam_low]

the jokers are out in force tonight !!

Im used to using a Stanley CL 90...with a pole. So that gives me total control without a 360 rotator. I see there are green lasers out now. MORE WONGA THOUGH !

 

[Stef]

Cam I was using Petes (PJC) it's a good little laser.
PLS, can't remember the model though.
I was looking at the Dewalt 089k??
Think mines is 087 or 088, new Dewalt gives you square on floor & looks good.

 

[Alan M]

i have the 0 89k . its a great laser.
I often use it. for timber panelling . or putting up ceiling joists in awkward spaces.
I would definitely recommend it to anyone
the self levelling is great but if you want to tilt it to angles it wont do that

 

[cam_low]

cheers for the help guys.

I think I will be heading for the GL250 kit coming in at around £280. Does anyone have this or an opinion on it ?

Thanks

 

[White Room]

Strewth thats expensive, I bought a Leica cheaper than that....

 

[m3fitter]

Green lasers are the way forward. . Especially for distance and bright days / rooms

 

[orange peel]

I have the dewalt 088 and the pls both very good

 

[Dave]

I have the dewalt and the pole .

 

[poynton phil]

I use a PLS2 cant fault it, i use the dewalt pole with mine. http://plslaser.co.uk/products/continuous-line-lasers

 

[trustiling]

I have a couple of dewalts with the screw magnetic plate but one is completely off horizontal, okay vertical though.
Is there anyway of calibrating these?
Think I'll go for the Leica,makita or PLS next

 

[Alan M]

send it in for calibration. there are several companies doing this.

 

[trustiling]

Which companies, And how much?

 

[squeaky]

ive got the Dewalt DW089k cant fault it . got it from the Dewalt spennymore store at a BIG DISCOUNT . http://service.dewalt.co.uk/Support...cationID=0325d809-dc9c-4b8b-ab3f-2308c28133b6[h=1][/h]

 

[Plitochnik]

I use bosch gll 3-80

 

[Chris_32]

ive got the Dewalt DW089k cant fault it . got it from the Dewalt spennymore store at a BIG DISCOUNT . http://service.dewalt.co.uk/Support...cationID=0325d809-dc9c-4b8b-ab3f-2308c28133b6[h=1][/h]

I also have this laser, does it all and very well made. would recommend if cost isn't an issue.

 

[swanman]

i have a level made by stanley

 

[Perry]

Cam I was using Petes (PJC) it's a good little laser.
PLS, can't remember the model though.
I was looking at the Dewalt 089k??
Think mines is 087 or 088, new Dewalt gives you square on floor & looks good.

Yes Steve it was a pls. all the shop fitters tend to use them or the hilti one.

 

[Time's Ran Out]

I have a length of tube I fill with water - it can be green if passed by the management!

 

[Perry]

I have a length of tube I fill with water - it can be green if passed by the management!

John I have only brought one since I started fitting the brick slips never used it for tiling. Because time is money.