Ivory Travertine bathroom walls and Morron floor.

[DHTiling]

The is a Bathroom i just completed today on the same house as the Pool job..

I had to again Bull nose all external edges including the 2 niches with mitred internal corners.. and an internal corner return bull nose as well..

This stone had some very nice colouring and virtually Zero filler marks.

I also installed Morron Dark Emperador marble on the floor and same marble on the walls in mosaic inset panels.

Just needs the Morron W/tops on and the piece on the bath front..

 

[hillhead]

Very well executed Dave as usual,like the marble

 

[Time's Ran Out]

Very nice!

 

[Daz]

Lovely job mate . There I was, all pleased with my sandstone floor and you've just watered all over my fireworks.

Out of interest, what is the grout width?

 

[DHTiling]

2mm walls..3mm floor.. and pci grouts..

 

[Alan.P]

Nice looking stone Dave great job as well, of course :smilewinkgrin:

 

[jay]

very nice Dave well done

 

[nybor62]

one word , QUALITY

 

[Pebbs]

Lovely work...can you start Monday?

Pebbs

 

[The D]

pukka m8 :drool5:

 

[david campbell]

great work love the bull nosing especially on the wall around the lower roof section.did you or the customer pick the tile choices?

 

[DHTiling]

Customer chose the stone Dave.. It was all from Perfect home and garden and the suite etc is villeroy & boch gear.

 

[b30 villain]

lovely job bud. loving the floor tiles very nice

 

[stevee]

nice work dave looks great

 

[faithhealer]

That bull nosing makes it from a great job to a fantastic job doesn't it

 

[enduro]

That bull nosing makes it from a great job to a fantastic job doesn't it

I agree, that bull nosing is awesome. Do you do it with your radial saw or angle grinder with the bull nose cutter?

 

[The Legend; Phil Hobson RIP]

Nice job Dave

 

[diamondtiling]

Cool work there Mr.Howe.

Top quality as always.

 

[DHTiling]

I agree, that bull nosing is awesome. Do you do it with your radial saw or angle grinder with the bull nose cutter?

I have a 10mm radius bull nosing bit for the flex machine i have.. makes life easier.

 

[enduro]

I have a 10mm radius bull nosing bit for the flex machine i have.. makes life easier.

What model flex do you have? Do you have the water attachment on it.

 

[DHTiling]

It is the dry Flex machine andrew..

It is the L1506VR model... from national masonry supplies. National Masonry - Consumables Catalogue page 79..

 

[united]

Cracking job as usual mate

 

[Ken Bruty]

Beautiful job Dave. Those tools are very pricey too :yikes:

 

[mikebidd]

That is lovely mate

 

[DHTiling]

Beautiful job Dave. Those tools are very pricey too :yikes:

They can be, but soon pay for themselves on a couple jobs..

 

[The D]

did you get the full set m8

 

[DHTiling]

did you get the full set m8

I only got the Flex from Andy at NMS dean..

But i am going up there soon for some of his pads.. and some other bits..