insulation Quinn therm 50mm in conservetory

[Trevor Harmer]

Hi I'm in the process of laying ufh took up the old tiles to find the screed crumbling away so I have had to removed all the screed back to the concrete base. My dilemma is this. I have got 50mm Quinn therm QL to make up the screed base but this seems to be not so ridged if you kneel on the insulator it leaves your knee print! I will be laying 500x500 tiles what would you suggest laying the ufh over this and self level or add something ells on the insulator before self levelling?

 

[DHTiling]

Thats not an insulation i am familar with...!!.

Has it got the cement facing like other brands..?

 

[Trevor Harmer]

Hi Dave that's the dilemma its not like Marmox Tile Backer Board no cement facing
What do you suggest?

 

[DHTiling]

The only info i can find is that it is used under a screed or concrete base and not tile directly to...

try this info>> http://www.ribaproductselector.com/Docs/6/23666/external/COL223666.pdf?ac=

 

[Trevor Harmer]

I was thinking of using putting 6mm hardy baker board over this secured with adhesive then ufh and self level?

 

[DHTiling]

Are you just trying to build height up or is the insulation your worries..?

 

[Trevor Harmer]

No I'm worried about bounce or the sl cracking as you lay the tiles. on top of the insulator I've got about 25mm to play with this includes the sl the tiles and adhesive tile thickness is 10mm.

 

[DHTiling]

So the 50mm quinn is insulation..?..To tile directly onto this without it bieng fixed in situ is in theory a floating floor and i am worried about the compression issues with it...

What about a 50 mm marmox or wedi stuck down to the substrate..? much better compression ratio's and can be tile directly to...

 

[Trevor Harmer]

In hindsight 50 mm marmox or wedi would have been spot on but I do not have that option the insulation is already fixed to the substrate I am hoping to resolve this by the morning I appreciate you taking your time on this Dave do you think my suggestion will work in theory putting the hardy backer fixed to the foam is the same as a cement facing
board?

 

[DHTiling]

How is the quinn board fastened..?