I dont think I thought this one through...

[Pebbs]

I must have had my stupid head on this day...

As an addition to some main contract works I agreed to lay a 2.4x2.1m2 balcony with Portland Stone. The architect said its just cosmetic, and as there is no access out there no one will be walking on it. No problem i said 😳went off did the drawings, got them approved, and ordered the stone. However dum dum me did not think this one through. The joints are to be open for the rain to run to the asphalt beneath etc etc. The stone is on average 500x500x40mm it has to be raised of the asphalt by 10-15mm, what am I going to use to lift it? has any one got any suggestions...Keep them clean please!

Cheers Pebbs

 

[paul flight]

think ardex do a product now . give there tech boys a ring . not cheap but will hold the down on that ..:builder2:

 

[Pebbs]

I dont want to glue them down Paul, I want them kind of suspended on some kind of fixing or a grid.

 

[paul flight]

not seen that befor the will have to look online or talk to there stone supplier?? good luck ..

 

[Colour Republic]

sky hooks

 

[david campbell]

self levitating compound?

 

[DHTiling]

This could be the system you need..

[ame=http://www.youtube.com/watch?v=RtcujxYCb7o]YouTube - Nurajack.wmv[/ame]


Or this type..


[ame=http://www.youtube.com/watch?v=PjN7g3pbILk&feature=related]YouTube - Outdoor floating paving system[/ame]


there are a few systems about..

 

[fipple]

its called suspend-ahoax_...comes in 20kg bags!...you mix the invisible frame work (transluent)and wait for the wind to pick up,then throw the tiles on top...hey presto!

 

[mikethetile]

shluter do the system you require, they are pads that lift the tiles off the deck and suppoert them to aloow drainage

 

[Spud]

just lay it on loose gravel its done like that on balconies all over europe as long as you are sure there will be no heavy traffic they will be fine