Gulfstone fixing tips - Tile Advice

[On one]

Just heard i might end up fitting 6m2 of Gulfstone on some walls next week,never fitted this stuff before so has anyone got tips?
Which Flexi adhesive.... 1 or2 part?
Which flexi grout? ..... does it scratch?
Which sealer?
What to do,what not to do etc,etc

Cheers.

 

[Dontiler]

hello
You can use something like keraquick, or some other ady, just keep in mind that these tiles have low porosity,
and do give the back of them a good clean, they seems come in the boxes with dusty back, when fixing open all boxes and take tiles from different boxes, sometimes they vary slightly, before sealing them check better with supplier, some good quality gulfstone don't need sealing at all, they cut easy, but smell badly
Good luck

 

[kevin67]

if you say your putting them on walls you need to watch your weight limits as these are heavy tiles.

 

[White Room]

As above, what surface are you tiling to..

 

[On one]

Haven't seen the job yet,but could be a mix of plasterboard and plaster.I take it it would be over the weight limits for these backrounds? The tiles are most likely to be from the Gemini catalogue

 

[White Room]

Please read http://www.tilersforums.com/tiling-forum/48551-tile-weights.html