Currently reading:
Floor prep....

Discuss Floor prep.... in the UK Tiling Forum area at TilersForums.com.

Mouldy

TF
Arms
21
563
Park Gate
to revisit this one last time, (promise!), any reason I cant re-deck with 22mm P5 and then overboard this with 12mm WBP? Reason for asking is it will be less critical to get the noggins in the right place to support edges of the ply, the P5 of course having T&G which I can glue.


If noone thinks this is a bad idea then this is the way Im going to take it......
 

Reply to Floor prep.... in the UK Tiling Forum area at TilersForums.com

There are similar tiling threads here

I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe had worn away over the past 70 years, causing a small crack in the copper. A plumber/builder fixed...
Replies
1
Views
854
Hi all, I'm hoping you can help with some feedback, please My parents are currently having a new bathroom installed, all stripped back to bare walls and floor. The fitter has done/hasn't done...
Replies
17
Views
701
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in preparation for tiling. A couple of days after there's a lot of very fine cracks which have appeared, you...
Replies
5
Views
836
    • Like
Hi, Can't seem to find a solid answer as I realise so much depends on multiple factors. I'm planning to tile my kitchen floor with 8mm porcelain floor tiles (660x440mm). My kitchen floor is...
Replies
0
Views
2K
    • Like
Hi, I am planning on tiling my concrete garage floor with porcelain tiles. The concrete was laid down several years ago by a previous owner, and it looks like it was also polished and sealed -...
Replies
2
Views
1K

Advertisement

You're browsing the UK Tiling Forum category on TilersForums.com, the tile advice website no matter which country you reside.

Top