Depth of 40mm waste from gully below surface of former please?

[cornish_crofter]

Today I had a chat with the customer who wants a wetroom installed, regarding drainage.

We need to know the typical depth of the 40mm run out from the gulley below the surface of the former.

I am looking at the Tilux 900x 1200 former on Wetdec's site. We haven't got much in the way of room to give us a fall, so we need to know if it can be done easily.

Thanks

 

[wetdec]

The gulley measures just 70mm below the former, you need a fall of say 1cm per lm, is that what you need


tiler

 

[cornish_crofter]

Thanks for that :hurray:

The 70mm you mention, is that the total depth of the gulley or the depth of the centre line of the 40mm waste connection below the gulley?

I don't think it will make a difference at that depth but it would be good to know.

Thanks again. We'll probably need to speak to you about delivery etc v soon

 

[DHTiling]

Hi Hugo..this might help..

http://www.diy-wetrooms.com/image.php?object_type=detailed&image_id=1412&window=popup

 

[cornish_crofter]

Thanks Dave, just the ticket.

I think we can run with this info.