M
mclewley
I am tiling a wall with an alcove for shelves and would like to know where to start. I am using natural stone mosaics. Please advice.
Thank you,
Boz
Thank you,
Boz
Advice on tiling on wall with a window
UK Tiling Forum; Established 2006
Welcome to the UK Tiling Forum by TilersForums.com, built in 2006 by Tilers, run by Tilers.
View all of the UK tiling forum threads, questions and discussions here.
Tilers Forums Official Sponsors
B
bigdaz
doesn't really matter if you're using mosaic
M
mclewley
Hi,
Attached are a couple of photos of the feature wall I would like to have tiled. I am going to have stone mosaics on the entire outside wall. The inside of the alcove will have a downlight and will have glass shelves and will be painted. I am having a wood worktop on the bottom of the alcove. The mosaic sheets are 305x305mm. The walls either side of the alcove are 320mm wide. Where shall the tiler start? Any advise appreciated.
Thanks
Attached are a couple of photos of the feature wall I would like to have tiled. I am going to have stone mosaics on the entire outside wall. The inside of the alcove will have a downlight and will have glass shelves and will be painted. I am having a wood worktop on the bottom of the alcove. The mosaic sheets are 305x305mm. The walls either side of the alcove are 320mm wide. Where shall the tiler start? Any advise appreciated.
Thanks
Attachments
H
hotburrito
you'll maybe need to let the plaster dry first?
S
sWe
The tiler starts with planing the layout of the tiles on the wall, marks out where he wants the alcove, and then installs it 🙂
Don't worry, it's a common misstake. What you need to think about now it to use the alcove as a starting point. You need to "frame" the mosaics on the edges of the alcove in a way which goes well with the rest of the wall, but as the alcove is the centerpiece, making a symetric "frame" is top priority.
If you can get whole tiles on all edges, or a half tiles on all sides with L cuts in the corners, you've done real well.
If that's not possible, but if you can get, say, whole tiles on the upper and lower edges, and 2/3 of a tile on both the left and right edges, it's ok, as long as it works with the rest of the wall. 1/2 a tile is minimum when dealing with mosaics in my opinion.
It's a bit hard to explain without pictures, or actually being there, but I think you get the gist.
Don't worry, it's a common misstake. What you need to think about now it to use the alcove as a starting point. You need to "frame" the mosaics on the edges of the alcove in a way which goes well with the rest of the wall, but as the alcove is the centerpiece, making a symetric "frame" is top priority.
If you can get whole tiles on all edges, or a half tiles on all sides with L cuts in the corners, you've done real well.
If that's not possible, but if you can get, say, whole tiles on the upper and lower edges, and 2/3 of a tile on both the left and right edges, it's ok, as long as it works with the rest of the wall. 1/2 a tile is minimum when dealing with mosaics in my opinion.
It's a bit hard to explain without pictures, or actually being there, but I think you get the gist.
Last edited by a moderator:
D
DHTiling
Also if the mosaics don't work whole ones then you can line the inside reveals and cill etc with plaster board or thinner backerboard to make it full tiles....just another thought....
S
sWe
That's quite clever actually.
H
hotburrito
that is pretty clever actually..............once i worked out what you were on about! :stupid:
G
GazTech
Very clever and standard practice, you have to be wiley when working with mosaics.......Gaz
G
grumpygrouter
M
mclewley
The plan is to tile in 3 weeks time!
Boz
----
Hi,
The plan is to tile in 3 weeks.
Boz
Boz
----
Hi,
The plan is to tile in 3 weeks.
Boz
Last edited by a moderator:
