Wet tile saw - TilersForums.com

[Wishiwasatoptiler]

Looking for a wet tile cutter, just something around 400mm bed for kitchens and small bathroom tiles, saving going outside with the grinder, but don't want to get wet using it, ordered one from ctd yesterday
ND 180 rubi but have since read poor reviews, really looking at £150 ish spend
Cheers fir your input

 

[Dumbo]

Rubi nd 180 is ok as long as it's not the bl which stands for basic line . But you will need something to catch water running of the bed.

 

[Bopster]

This is a great little cutter
TT200em

Flexovit TT200EM 240V 200mm Powered Tile Saw

Flexovit 701846262963 Powered Tile Saw 220 volt 200mm

www.ffx.co.uk

 

[Wishiwasatoptiler]

Think is is as it said smart nd180 which makes me think is, the rubi catolouge was a bit vague and it was quick decision with checking it out. Going to cancel the order today. Whats the water spray like bobster on that and is the fence any good, think ctd to clipper so that will keep them happy.

 

[Bopster]

Spray is minimal and most of the water runs back into the tray.
Guide is good also
ctd is where mine came from
I used to have Rubi 180 and never really liked it.

 

[Andy Allen]

Vitrex pro 750 ....
I use mine all the time indoors with decent dust sheeting...
A great cutter at a very good price..

 

[GoneGuy]

I hear good reviews on this little wet saw

https://www.*******************/product/briccolina-electric-tile-wet-saw-230v-39ingl2

 

[Andy Allen]

I hear good reviews on this little wet saw

https://www.(temp block)/product/briccolina-electric-tile-wet-saw-230v-39ingl2

There great too, not sure how easy the blades are to get....

 

[Wishiwasatoptiler]

Thanks folks, i have looked at the briccolina, the vids online look good, is the virtex a 750mm bed or is the watts, just looking for something small as i have a 600mm bed one that i dislike a lot so never use it.

 

[Unused Account 1]

Vitrex ,great for kitchens and ceramics,great price ,its all about the blade

 

[Tony_C]

it's 750 watts. I've been using a Vitrex 560 for a couple years, popped an ATS blade on it and it has been perfect. You can also buy the Vitrex cutters under the QEP brand name for a little less but not the model Andy mentioned