tanking out shower onto moisture resistant p/board - advice needed!! - TilersForums.com

[stiggla0]

hi

im installing a corner shower which has the green p/board stuff on 2 sides. im going to tank it with either bal or the dunlop stuff- my question is do i need to prime the p/board before applying the tanking?

cheers

mark

 

[paulvdavies]

Hi Mark,
I have used the BAL kit quite a few times and yes you do. The kit comes with all the gumph, primer etc and very easy instructions. Easy peasy....

Paul

 

[aph257]

if you buy a kit it will tell you what to do. but yes it would normally need to be primed.

 

[White Room]

Remember the primer may take a little longer to dry because of the green board

 

[Ceramica Tiling]

Remember the primer may take a little longer to dry because of the green board

Yep you might have to wait 10 more seconds

 

[White Room]

Still longer, even though it soaks in dos'nt mean it's dry

 

[Ceramica Tiling]

Get real

 

[White Room]

What does that supposed to mean

 

[Dan]

Get real

Hi, :waves:

We have a strict be nice rule here, if you don't follow it, you risk loosing your forum account.
If you have something that backs up your issue, whatever that is, then present it professionally and prove your point. If you don't have, don't wind the lads up because they can back up their claims.