Split faced tiles unsightly gaps

[Wayne Brown]

These need tidying up as the tiler didn't give em the attention he should have some unsightly gaps can these be grouted if so what would be best to use. Cheers kop

 

[Time's Ran Out]

Grout float and a finger but wash off fairly quickly.
Be fun getting it flush!

 

[Wayne Brown]

Wont be me doing it John thanks for the tip bud. Cheers kop

 

[Time's Ran Out]

Flush - Wc.

 

[Wayne Brown]

3 of them to do pita on the split faced tiles. Kop

 

[Bill]

sometimes split face tiles do not tie in close together - the product is notorious for misshapes.

The 1st photo, the tiles and plasterboard should been cut closer to the waste, flush inlet and bolts. Apart from that - it doesn't look too bad.

One more point - I never understand why folk have difficult to clean surfaces in wet areas.........

 

[Spare Tool]

sometimes split face tiles do not tie in close together - the product is notorious for misshapes.

The 1st photo, the tiles and plasterboard should been cut closer to the waste, flush inlet and bolts. Apart from that - it doesn't look too bad.

One more point - I never understand why folk have difficult to clean surfaces in wet areas.........

I thought that about the board and tile gap round the pipes too, don't think the toilet will cover that?

 

[Waluigi]

I assumed the tiles were cut around the shape of the pan.

 

[Wayne Brown]

I assumed the tiles were cut around the shape of the pan.

You are correct Waluigi , ply is fitted to the frame toilet bolts to the frame and sits inside the split face tiled. Kop

 

[Bill]

You are correct Waluigi , ply is fitted to the frame toilet bolts to the frame and sits inside the split face tiled. Kop

But you are NOT supposed to cut around the pan... it is a surface mounted pan.