Slate job

[David Rowell]

Ive a small porch to price up. Tiles are 300mm x 300mm and 10mm thickness. Whats the best way to cut ?

Wet saw or manual cutter?

 

[widler]

Slate??
Bridge saw or grinder
No chance with a manual

 

[David Rowell]

What about the table saw type?

 

[Rich Midge]

Obviously depends on the machine you've got, but if its got a half decent motor and a good blade you should be ok. Make sure to use plenty of water and don't force it, let the disk do the work.

 

[SJPurdy]

What about the table saw type?

wet table saw type ok for such a small job. will need to change water a few times to keep it running reasonably clean

 

[David Rowell]

Thanks for the help everyone ive just won the small job so ill share some pics tomorrow

 

[David Rowell]

The base im tiling onto is concrete its dry and level. Will a flexible floor adhesive be sound to use if i prime it first?

 

[NWTiles]

Prime with a acrylic or sbr primer and use a standard adhesive not need for flexi as it's concrete ensure the adhesive is grey to ensure no staining of the slate, then seal with an appropriate slate sealer or intensifier.

 

[Rich Midge]

Sounds good to me. Be sure to back butter each piece and you shouldn't have any problems. The slab is definitely dry? No ufh?

 

[salmonfisher]

Another so called tiler taking money of a customer for a job he is clearly hasn't a clue how to do

 

[David Rowell]

Wow for someone who has only tiled for 5 years you have alot to say. I can tile but not done slate before.
Just think back when you was still learning the ins and out of your trade !

 

[David Rowell]

Message deleted

 

[David Rowell]

Sounds good to me. Be sure to back butter each piece and you shouldn't have any problems. The slab is definitely dry? No ufh?

Yes slab is bone dry its a porch only a couple of meters and is existing. And no ufh rich

 

[Sean SML Tiling]

Are they calibrated or uncalibrated slate?

 

[David Rowell]

Are they calibrated or uncalibrated slate?

Calibrated all tiles are the same thickness and sizes

 

[Sean SML Tiling]

Couldn't be better for your first slate job.

 

[David Rowell]

Couldn't be better for your first slate job.

Maybe its my lucky friday 13th then lol. Viewed it today and quoted and won it haha:hurray: subtrate is sound level and flat as a pancake too

 

[David Rowell]

Couldn't be better for your first slate job.

You in newport shropshire sean?

 

[Sean SML Tiling]

Nope Newport Wales.

 

[Stocks Tiles]

Ignore the comments about ripping customers off - everyone has a first job in a different type of tile, knowing slate is not your usual type of tile you've been wise to seek advice before hand, that's sensible! My first slate Job was 95sqm of uncalibrated slate and I used a 4" grinder for it all, I was advised by a guy who only works with stone to not use a wet cutter unless plan on leaving all the cuts to dry out as shouldn't lay them wet, it was dusty as hell but turned out well haha! Remember to work clean whipe any mess off as soon as any touches the slate as it will stain and I'm sure you know to seal it before grout etc?

 

[David Rowell]

Ignore the comments about ripping customers off - everyone has a first job in a different type of tile, knowing slate is not your usual type of tile you've been wise to seek advice before hand, that's sensible! My first slate Job was 95sqm of uncalibrated slate and I used a 4" grinder for it all, I was advised by a guy who only works with stone to not use a wet cutter unless plan on leaving all the cuts to dry out as shouldn't lay them wet, it was dusty as hell but turned out well haha! Remember to work clean whipe any mess off as soon as any touches the slate as it will stain and I'm sure you know to seal it before grout etc?

Cheers stocks top man:hurray: Ive got flexible adhesive, primer, grout and yeah i got a sealer for slate Ill take my time and wipe as i go. So come to grouting what would you suggest method wise if the tile stains? Or will it be sound if i keep it clean?

 

[Dougs Third Go]

Another so called tiler taking money of a customer for a job he is clearly hasn't a clue how to do

times have moved on, we can either get stuck in the old ways of speaking when we're spoken to..or we can ask online, if we can steer OP to achieving a satisfactory result is that not a result in itself?

 

[Stocks Tiles]

Primer the floor, lay the slate keeping it clean, wash the slate when finished so it's all clean, wait till 100% dry then seal, leave it on for around 20 minutes then whipe the excess off with a clean towel/cloth which doesn't contain fluff lol (try do this end of the day) then grout the next day, make sure it's all clean again and seal again, slates very time consuming but get that first seal on as soon as possible as we all know customers can make mistakes, like cleaning a leather sofa with detol cleaner when told to stay off...! Lol.

 

[Qwerty]

times have moved on, we can either get stuck in the old ways of speaking when we're spoken to..or we can ask online, if we can steer OP to achieving a satisfactory result is that not a result in itself?

Well said Doug [emoji106]

 

[David Rowell]

Primer the floor, lay the slate keeping it clean, wash the slate when finished so it's all clean, wait till 100% dry then seal, leave it on for around 20 minutes then whipe the excess off with a clean towel/cloth which doesn't contain fluff lol (try do this end of the day) then grout the next day, make sure it's all clean again and seal again, slates very time consuming but get that first seal on as soon as possible as we all know customers can make mistakes, like cleaning a leather sofa with detol cleaner when told to stay off...! Lol.

thanks very much stocks seal before grouting or after washed down?

 

[Stocks Tiles]

Seal slate twice, once before grout and again after grouting

Tile - wash and let dry - seal - grout - wash and dry - seal again - get paid

 

[Rich Midge]

One of my first jobs as an apprentice when I was 17 was grouting a slate floor. I started with the skirts and did the top edge with my fingers because I knew no better. Every finger bled by the end of day!

 

[David Rowell]

So a big thanks to everyones input to the questions i had. I attended the job thinking the slate was all the same dimensions as the two the guy showed me were very similar. However I was sadly mistaking and found myself thrown in the deep end lol cutting most tiles into shape. The customer was thrilled and has offered me back to nake a cabinet for then so happy days.

Again cheers everybody all your input was much appreciated :hurray:

 

[David Rowell]

Are they calibrated or uncalibrated slate?

Scratch my reply and note to self always check the packs not just 1 or 2 tiles before you price. They were un calibrated not only in thickness but some of them wasnt even square. Had to cut with angle grinder

 

[Sean SML Tiling]

Haha my first job was uncalibrated and I think I was nearly bald by the end.