quarry tile sealant

[bgatty68]

I am looking to seal quarry tiles and grout that i laid last week for my outside porch, can anyone recommend a good sealant please:smilewinkgrin:

 

[grumpygrouter]

Are they Ruabon quarries? If so they don't need sealing.

 

[paul flight]

try sealing them fila satin wax finish let sealer dry. then grout . two washes the seal again . will come up lovely. fila can be purchased from topps. this can be added to .

 

[doug boardley]

there's some sealers here
LTP Online | Pick Finish

 

[Perry]

50% boiled linsed oil and white sprit wipe on with cloth then wipe off with a dry one dont leave it on there and burn the rags as they will self-combust 😛ete

 

[marbleman]

best finish is boiled linseed oil and white spirits been using it for years , best value for money

 

[DHTiling]

Do a water test on them first.. a lot of quarry's are factory finished.

If the water beads then they will be fine.

 

[bgatty68]

thanks to all of you for the advice. went with LTP in the end, got it from my local tile stockist looks great and most important wife likes it:hurray: