Porcelain Queery..?

[Caledonian Tiling]

Hi all,

I am starting a kitchen floor tomorrow using 30x30 "UNPOLISHED" porcelain
tiles, i am wondering if there is any treatment/cleaner i should consider, i
am asking as as far as im aware i would only use sealer on "POLISHED"
porcelain...?

Any feedback as always very much appreciated..

Caledonian.

 

[Concept PHT]

It depends, ask the guys at the tile shop where you got them from. Also, consider using white adhesive if the tiles are towards the whiter colours

 

[Caledonian Tiling]

Hi,

They are a light grey colour, the store just gave me grey grout
and never said anything about needing them sealed, i didnt think
white grout would do on a kitchen floor due to the high traffic and
looking dirty very quickly, but i will speak to the customer 2moro
on it... thanks for the tip!

Caledonian.

 

[Leatherface]

I seal ALL porcelain that is not glazed - try the water test - drip a few drops of water onto the tiles - you will probabbly find that the drops look as though they will evebtually absordb into the tile. Once sealed you would delinately see a difference - the water glides across the surface of the tiles in bubbles.
You could do worse than using LTP Sealers ( my preferred brand ) - there is one designed for every application. As a nice touch they also have maintenance products for the customer to use for cleaning - harsh cleaners damage the sealers. If you phone "Specialist Tiling Products" in Harrogate, they will advise and deliver, or point you in the direction of a local stockist.

 

[Concept PHT]

Hi,

They are a light grey colour, the store just gave me grey grout
and never said anything about needing them sealed, i didnt think
white grout would do on a kitchen floor due to the high traffic and
looking dirty very quickly, but i will speak to the customer 2moro
on it... thanks for the tip!

Caledonian.

White adhesive!! Grey grout will be fine, as long as the tiles are sealed 🙂

 

[UKTT Darren]

If any tile is quite pure or very light colour, best to back scim the tile as well as the ribs of adhesive or you will see the shadows of the adhesive, the back scim is with the flat side of the trowel at about 1mm thick

 

[Leatherface]

If any tile is quite pure or very light colour, best to back scim the tile as well as the ribs of adhesive or you will see the shadows of the adhesive, the back scim is with the flat side of the trowel at about 1mm thick

Aye to that !!!! 🙂

 

[Caledonian Tiling]

Well i think it came out not to bad, not the best of pics from my
mobile but, no white grout..lol and backskimmed them as suggested.

Thanks for the pointers..

messy skirting i know, didnt have my mr sheen out at that point..

Caledonian.

 

[Concept PHT]

Excellent work there mate 🙂

 

[UKTT Darren]

Looks good to me

 

[Caledonian Tiling]

Cheers,

Feedback good/bad always appreciated...

.

Caledonian.