Polished Concrete Floor Prep Advice Needed - Tile Advice

[H573]

Hi Everyone, hope all’s well. I’ve been asked to tile a polished concrete floor, approximately 80 m2 , floor is in decent condition was laid last year, what’s beat prep wise?

I can’t get ditra matt or anything like that here.

Thanks

 

[LM]

You’ll need to scabble the floor for a key or sand it clean, vacuum, grit prime and leveller. Phone your intended adhesive manufacturers tech help line, some of them vary in what they’ll advise their products can do.

 

[H573]

You’ll need to scabble the floor for a key or sand it clean, vacuum, grit prime and leveller. Phone your intended adhesive manufacturers tech help line, some of them vary in what they’ll advise their products can do.

Thanks Lee 👍🏼

 

[Ajax123]

Rather than scrabbling it might be possible to use two coats of epoxy primer with sand scatter into the second coat to give you the rough texture to key to.

 

[H573]

Rather than scrabbling it might be possible to use two coats of epoxy primer with sand scatter into the second coat to give you the rough texture to key to.

Great stuff thanks for your help 👍🏼