Hello Tilers
I recently fitted a bathroom for a (paying) friend.
One of the problems I encountered was the soil pipe which runs behind, then turns to run along the tap end of the bath. I made up the gap with 76 x 51 mm (3''x 2'') CLS, I tiled it forming a slope to shed water, grouted and then realised that the bottom edge of the over-bath shower screen would not reach the bath edge due to the sloping tiles.
I'm thinking of fixing some sort of post to the wall with the bottom trimmed to the slope and then fixing the screen to that. If that's advisable, what material could be used?
I'd welcome any suggestions, thanks.
I recently fitted a bathroom for a (paying) friend.
One of the problems I encountered was the soil pipe which runs behind, then turns to run along the tap end of the bath. I made up the gap with 76 x 51 mm (3''x 2'') CLS, I tiled it forming a slope to shed water, grouted and then realised that the bottom edge of the over-bath shower screen would not reach the bath edge due to the sloping tiles.
I'm thinking of fixing some sort of post to the wall with the bottom trimmed to the slope and then fixing the screen to that. If that's advisable, what material could be used?
I'd welcome any suggestions, thanks.