Dewalt D24000 problems

[macten]

End of last job my saw has started to sound dog rough - like gravel.
Bit of vibration too.
I'm guessing the bearings are wrecked - anyone had experience with this before?

 

[Dumbo]

I had bearings go a rubi once and got it repaired at electrical motor place. I expect if you're handy you could probably get some bearings from a bearing supplier and do it yourself for a few quid .

 

[macten]

I've just disassembled it as far as I dare go - got the gear case off and first couple of sets of bearings and they are all fine (shame as they are only £4.50). At least I know the problem is further back in the armature but that's gonna set me back £170 🙁

Might just keep using it till it detonates and look out on fleabay for a used one going cheap - let me know if anyone hears of one going!

 

[J Sid]

Dewalt will service it I believe

 

[On one]

Mine's knocking on 10 yrs old,still going strong,despite cutting the size of tiles it wasn't designed to cut.

 

[Old Mod]

Depends how much you like it Nick.
They don’t seem to come up very often.
Might still be worth repairing.

 

[macten]

Well I do like it and I’d get another one if this was terminal. It’s the best compromise all rounder for the majority of the work I do.
It’s now at an authorised Dewalt repairer and he’s bet me that it will be the armature shredding itself. So bad news cos it’s costly but good news that he sounds like he knows what he’s talking about as I’d already narrowed it down to that.

 

[Dumbo]

Is it not possible to pump the motor no into the internet and just get a motor .

 

[Concrete guy]

DeWalt D24000 Type 2 Tile Cutter Spare Parts - Part Shop Direct - https://www.partshopdirect.co.uk/dewalt-d24000-type-2-tile-cutter-spare-parts-s7195/

 

[macten]

The armature is the main part of the motor. Hopefully the coil’s okay but the rotating part is the likely culprit.

Dewalt D24000 Type 2 Tile Cutter Spare Parts | Miles Tool & Machinery Centre - https://www.mtmc.co.uk/product.aspx?ProductID=131139&source=googlebase&gclid=EAIaIQobChMIpq6Xp7CJ4gIVq7vtCh37fQKnEAQYAiABEgJ_m_D_BwE