Bad limestone made good - TilersForums.com

[cfrazerg]

Wanted to put a quick post on, with some pictures attached to give others,who may be tearing their hair out some hope that black limestone can be saved and with a bit of work, can get the results you were hoping for.
After days of invaluable researching on this forum, we took the advice that had been suggested to others and attempted to put right the mess the builders had left us with.
Our only bugbear was that after taking advice from the forum no one ever seemed to post photos of their results. So here are ours....

 

[cfrazerg]

 

[cfrazerg]

 

[Dan]

That's awesome thanks for taking time to post them. I do try and encourage it but I guess people just get busy enjoying their bathrooms and whatnot.

 

[White Room]

A great improvement...glad to see builders at there finest

 

[Old Mod]

.....be interesting to know how you achieved your final finish?

 

[Qwerty]

.....be interesting to know how you achieved your final finish?

Yes, do tell!

 

[Rizzle from the Portizzle]

View attachment 75174

did you forget to slate seal some of the tiles or change the tiles

 

[Lithofin BOB]

Intreaged to know your finish on this.?

 

[cfrazerg]

I left some of the tiles till the day after as I had to stand somewhere to wipe the excess oil off. Also wanted to see a comparison whilst I was sealing them
.After speaking a few times to LTP helpline I used the grout stain remover, very diluted, left it 2 days and then used LTP stone oil - just one coat so far. Decided against using the colour intensifier after speaking to the helpline as they said it wasnt necessary to use both.