Hello. Doing... ( extremely slowly ).. a walk-in shower & additional soaking tub area
1) What specific size notched trowel for 6"x18" Carrara (stone) marble on Kerdi board shower walls.
Installed in a 50/50 brick pattern with 1/16" jts. Tiles will be back buttered
2) Is a levelling system advised? Tiles seem quite flat & uniform.
3) Some tiles have a resin mesh backing ( 5 - 10%??). Should these be coated with epoxy or ??, prior to thinsetting with Schluter ALL-SET.
4) Recommendations for a light grey grout?
1) What specific size notched trowel for 6"x18" Carrara (stone) marble on Kerdi board shower walls.
Installed in a 50/50 brick pattern with 1/16" jts. Tiles will be back buttered
2) Is a levelling system advised? Tiles seem quite flat & uniform.
3) Some tiles have a resin mesh backing ( 5 - 10%??). Should these be coated with epoxy or ??, prior to thinsetting with Schluter ALL-SET.
4) Recommendations for a light grey grout?
