Tile Tracker or Wood Batons

[Simon benn Leeds]

Bottom cuts for me, that's where the little red wedges really come in handy.

U still ok for tomorrow mate?

 

[mattle40]

U still ok for tomorrow mate?

Ye, be there at 8 pal

 

[Stocks Tiles]

I set my laser up and do the bottom row of cuts and then go up, I used to hate it the first few times but now I find it very helpful

 

[Spare Tool]

Wood batons imo, I go woodyard and get half an 8x4ft sheet of 12mm wpb sliced down into 2inch x 4ft lengths on their flatbed saw...perfectly flat, that usually lasts me about 6months, each to their own system but datum line and staff and batons works for me..

 

[Old Mod]

Wood batons imo, I go woodyard and get half an 8x4ft sheet of 12mm wpb sliced down into 2inch x 4ft lengths on their flatbed saw...perfectly flat, that usually lasts me about 6months, each to their own system but datum line and staff and batons works for me..

U old fart! Haha

 

[Spare Tool]

U old fart! Haha

Haha..till someone shows me a better method of marking a room up and landing a full tile over a window or door to the mill and impossible to loose your groutlines I'm sticking with it mate

 

[Old Mod]

Haha..till someone shows me a better method of marking a room up and landing a full tile over a window or door to the mill and impossible to loose your groutlines I'm sticking with it mate

Come work with me Andy mate, I'll show u!

 

[Spare Tool]

Come work with me Andy mate, I'll show u!

Haha..not sure I could cope in your village mate, too many folk about

 

[The Legend; Phil Hobson RIP]

I use 40mm x8mm timber.

 

[Wishiwasatoptiler]

Thanks for all the tips, seems there's no need to splash out on the tile tracker, think I'll give all ago and see what works for me best. I had thought about boxed steel too, but like the idea of picking up the wickes gear.

Cheers

D