Sigma 9m1 Might be worth a bid

[Chalker]

Not too far from me.
have got a 10m9 so not for me, at £99 so could go cheap!

http://www.ebay.co.uk/itm/Sigma-Til...099?pt=LH_DefaultDomain_3&hash=item418993b58b

 

[White Room]

He states that the saw can cut upto 500mm, sure it could do bigger than that....

 

[Chalker]

If you can hold it, it will cut it!

 

[Diggy]

Pity its 240v

 

[Dave]

Excellent saw at a good starting bid imo ... The 500mm is the sliding bed , however you can free length cut after that.

 

[White Room]

Just one bid, maybe worth a punt....

 

[Sigma UK]

These come in either 1.5hp or 3hp. Someone's going to get a bargain here!.

 

[Dave]

Just under 2hrs left , still £99

thats cheap..

 

[Dougs Third Go]

I'm kinda tempted...but I need a dry cutter (well not need, but probs a priority over a wettie) so looking for a deal on a 3CM

 

[lizzardtong]

im bidding on that.

 

[White Room]

It's in Yorkshire, bit far for me...

 

[lizzardtong]

im in cardiff.

 

[White Room]

im in cardiff.

Don't want to spoil your fun:smilewinkgrin:

 

[widler]

Imi n lancs, a good few hours for me

 

[Dougs Third Go]

Imi n lancs, a good few hours for me

across those Pennines Craig...you don't wanna go there ha ha!

 

[widler]

No chance Doug , scary dismal place is Yorkshire , full of Yorkshire men and sheep [emoji33]

 

[Dave]

Sold for £122.87p

 

[White Room]

He lost money on that one but a bargain to boot...

 

[lizzardtong]

Do we have any members from that area?

 

[Chalker]

I'm about 20 miles away

 

[lizzardtong]

I will pm you

 

[Sigma UK]

Sold for £122.87p

The blade costs more than that!. Bargain.

 

[lizzardtong]

arrived today. will have to get new blade soon for it. question is 250 or 300 mm?

 

[Chalker]

Should be 300mm but you can fit a 250. You need to adjust the little slide thingy at the back of the blade to stop water do splashing out if you are using the smaller blade.

the hole diameter is 30mm.

the sigma blade is expensive. Ats make blades that fit.http://www.atsdiamondtools.co.uk

 

[lizzardtong]

im tempted by that ats blade