Recessed channel for glass shower panel

[Hart1]

I have seen a floor channel with a solid rubber insert about 12mm wide, this was in a changing room floor for a swimming pool and was used to divide the changin room floor tiles and shower/toilet area floor tiles. Both wet areas.
I want to use part of the channel to hold a glass shower panel and the rest (with rubber insert) to divide the two tiled floor areas. I haven't been able to find any like products. Any ideas?

 

[Gazzer]

Hello Hart1, welcome aboard TF.

 

[Deleted member 9966]

Hi Hart1, I've moved your thread to a more appropriate forum.

 

[Diamond Pool Finishers]

:welcome:to the forum and sorry no idears

 

[frigiliana]

Checkout this company i found them when i was thinking of doing a similar thing. Heres a link
Polished Stainless Steel Glazing Channels - Spiral Hardware

 

[Colour Republic]

You don't need the rubber inset. Any alu or SS channel will do, then pump with silcone, insert glass, clean excess silcone

 

[Concrete guy]

Try these people:-

PREEDY GLASS - Glass Related Products and Services - Welcome to PREEDY GLASS J. Preedy & Sons have provided London and the home counties with a comprehensive range of constantly developing glass and glazing products and services since 1913, when Jose

 

[Time's Ran Out]

I have seen a floor channel with a solid rubber insert about 12mm wide, this was in a changing room floor for a swimming pool and was used to divide the changin room floor tiles and shower/toilet area floor tiles. Both wet areas.
I want to use part of the channel to hold a glass shower panel and the rest (with rubber insert) to divide the two tiled floor areas. I haven't been able to find any like products. Any ideas?

I think you have seen a filled expansion joint in the structure of the building. There is a recessed glass trim available from shower companies but they tend to want to sell the expensive glass as well! I get mine from a small bathroom company but it's not cheap, usually 10mm wide and is recessed into the wall or floor tiles up to 15/25mm and has a very small lip which covers the tile edge. As stated earlier fill with clear Silicon and insert glass.


Look up Majestic showers - profiles and seals - and you will see the exact trim.