Rapid setting slc

[Andy Allen]

Got a job next week where I'm tight on time. the bathroom floor is floorboards (solid) so I'm going to fix insulation boards , heat mat then slc over the heat mat but could do with tiling it the same day .....so is there a flexible slc that drys quick ?

 

[mma]

Tilemaster Rapid Level 30?

 

[Andy Allen]

Tilemaster Rapid Level 30?

How thick can it go to and is it flexible ?

 

[Andy Allen]

Bal do anything ?

 

[Spare Tool]

The ultra rapid is exactly the same as the TM, both are unbelievable how they turn from liquid to solid in the time it takes to grab a bacon butty and eat it 😉

 

[mma]

own thick can it go to and is it flexible ?

15mm max depth, says it's flexible...

 

[Time's Ran Out]

Tight on time - is it because it's not a full 3 day week for you?

 

[Spare Tool]

Gone are the days going home at 10am cuz "we've put some leveler down" is an excuse 🙂

 

[WetSaw]

Tight on time - is it because it's not a full 3 day week for you?

Class..

 

[Andy Allen]

Tight on time - is it because it's not a full 3 day week for you?

Yawn....

 

[LM]

Bal do anything ?

Level Max

 

[LM]

It's not as exspensive as you might think, I can get it at very competitive rates.

 

[J Sid]

Level Max

It's not as exspensive as you might think, I can get it at very competitive rates.

Andy, tile on in 4 hour max, 80mm depth and about £13 a bag 25kg
my favorite🙂

 

[Time's Ran Out]

Yawn....

You still in bed?

 

[Spare Tool]

Andy, tile on in 4 hour max, 80mm depth and about £13 a bag 25kg
my favorite🙂

Never used it but at 4 hours by the time that's dry could have stuck 3 or 4 metres with the TM or Ultra..

 

[Italy]

You still in bed?

this guy needs a bank mortgage to pay. at least find motivation to work. ahah

 

[Flintstone]

Just put Tm rapid level 30 down its perfect for this job and you can tile in 45 mins.

 

[J Sid]

Never used it but at 4 hours by the time that's dry could have stuck 3 or 4 metres with the TM or Ultra..

its all about planning your day.
nip in and do it the evening before, or what I'm doing today. Ufh and levelled by 9, then load out and get bits ready and then i will start a wall after 1.5 to 2 hrs when walkable.
I read somewhere TM tileable after 1.5 hrs, right/wrong?

 

[J Sid]

Just put Tm rapid level 30 down its perfect for this job and you can tile in 45 mins.

you sure about the 45mins, seen different time quote somewhere!

 

[Spare Tool]

its all about planning your day.
nip in and do it the evening before, or what I'm doing today. Ufh and levelled by 9, then load out and get bits ready and then i will start a wall after 1.5 to 2 hrs when walkable.
I read somewhere TM tileable after 1.5 hrs, right/wrong?

Got a bag of Ultra in the van...read for yourself

 

[Bill]

Got a bag of Ultra in the van...read for yourself

View attachment 85928

the difference between Level It and the Bal product is the depth of which you can lay it at - horses for courses if you need the added depth although personally, I would screed it myself in s&c if I needed 80mm build up and then use a green screed adhesive.

 

[Flintstone]

you sure about the 45mins, seen different time quote somewhere!

Try it for your self. Temperature makes a difference obviously, you won't get anything faster setting

 

[Spare Tool]

the difference between Level It and the Bal product is the depth of which you can lay it at - horses for courses if you need the added depth although personally, I would screed it myself in s&c if I needed 80mm build up and then use a green screed adhesive.

Andy wanted a leveler to go over ufh wires then tile same day, this is ideal for that 🙂

 

[Lee@emctiles]

Rapid Level 30
Rapid Level 30 Ultra Rapid Setting Fibre Reinforced Flexible Self Leveller

• Tile After 45-60 minutes
• Apply impervious floor finishes after 90 mins.
• Excellent self levelling properties.
• Apply from 2-15mm in one pour.
• Ideal for Under Floor Heating Systems.
• Ideal for plywood and chipboard overlay
• Simply mix with water.

simples........i does what it says on the tin

 

[Bill]

Andy wanted a leveler to go over ufh wires then tile same day, this is ideal for that 🙂

I agree but it was Julian who mentioned the Bal so I just added a caveat.

 

[J Sid]

I agree but it was Julian who mentioned the Bal so I just added a caveat.

that's it Tom blame me for igniting the TM debate again 😉
it was @Andy Allen who asked if Bal did anything, probably because he like me has got a TM stockist near by and @LEE MAC who sad Bal did one.

a sales pitch for TM after 30 mins for OP @Lee@TileTown 😉 must have fell in your tea break 🙂

 

[Andy Allen]

Spot on julian, you can go to the front of the class and get a gold star..🙂
i do struggle to get TM products but popped into the suppliers today and they do both the TM and bal rapid slc.....so spoilt for choice ......I like the fact the TM drys quicker but bal can go thicker.....decision's , decision's.....

 

[Lee@emctiles]

must have fell in your tea break 🙂

ha ha, you are a funny man Julian. So anti anything that C*D dont sell.......

one day you will try TM yourself and then you will see for yourself why alot of fixers like it.

(ps, still sell weber too!)

 

[J Sid]

yes I do use CTD Lee, mainly because I get great service and price, as I'm sure if i lived up your neck of the woods I use your outlet, plus here these no other outlet's around of note.

I have tried some TM adhesive, well twice, but not the leveller. Don't dispute its good gear, how can I, it's liked and used by many a notable member .

 

[Andy Allen]

I've used TM but prefer weber . ....
I'm I going to be outcast now...🙁

 

[Lee@emctiles]

each to their own as they say @Andy Allen i can only go on what is said to me at TTHQ, there are guys that come in here that still want to pay £3 a bag more for weber than TM, i dont mind, as long as they leave here happy. 🙂