Metros and finishing edges.

Tilers Forums Official Sponsors

AliGage

TF
Esteemed
Arms
Subscribed
Evening guys and girls.

looking for some help sourcing a tile, decorative ceramic or something to finish the edge of metros.

I have the situation of a half tiled room in white metros. Only theres a shower cubicle where it will be fully tiled. I'll post a picture later if I can.

the metros will be brick set and all corners mitred. But I dont kniw what to do on the half tile edges. I absolutely do not want to use a trim!

The style/theme is more traditional/heritage than modern and contemporary. Ive googled for some ideas and seen all sorts, but in particular the use if a decorative tile or similar, flat white ceramic.

what have you guys done in this situation? Anyone know of a good supplier of more traditional ceramics and stone?
 
Have the tiles got a decent long edge, as in, does the glaze wrap round so you can't see the biscuit? You could do a frame around the main field if they do, quite a common thing in American installations.
 
Have you looked on Original styles website.

I hadn't actually but wil do now.

Have the tiles got a decent long edge, as in, does the glaze wrap round so you can't see the biscuit? You could do a frame around the main field if they do, quite a common thing in American installations.

I'll have a look,I have one in the van.
However my concern is that these are quite deep. So, if I have a cut edge it will sit quite proud of the bevelled edge of any adjacent tiles.
 
I hadn't actually but wil do now.



I'll have a look,I have one in the van.
However my concern is that these are quite deep. So, if I have a cut edge it will sit quite proud of the bevelled edge of any adjacent tiles.
I see what you're saying, some grouting wizardry will be in order or try to make your edges finish on a 1/3- 2/3rd cut or 1/4-3/4 cut so they are of equal thickness to frame to rather than having a full tile/ half tile where one will be a cut and one will be a bevel. Bit long winded but, I think you'll know what I'm trying to get at 🙂
 
I get what your saying @Bri
I'll have a look Monday at how it can be set out.

I have two rooms of metros. One is 300x75 the other 150x75. The smaller I dont think ill be able to do that with without keaving small cuts.
 
@Dan I still can't like threads in the TA boards.

I think the difficulty is going to be matching the whites.

Thanks for your help guys, I'll start ordering up some samples.
 

Advertisement

Thread Information

Title
Metros and finishing edges.
Prefix
N/A
Forum
Australia Tiling Forum
Start date
Last reply date
Replies
15

Advertisement

UK Tiling Forum

Thread statistics

Created
AliGage,
Last reply from
AliGage,
Replies
15
Views
436

Thread statistics

Created
AliGage,
Last reply from
AliGage,
Replies
15
Views
436
Back