Level pins

[Kyle Knowles]

I tools make sumat called level pins used to mark the hight when ur pouring self leveler but there very expensive iv found another place where it's 28 quid per 100 but it's 12 quid shipping do know of any other places u can but these from

 

[Dan]

Do you mark them or cut them or what?

Can't you use broken tiles and adhesive and stack them until you're at the finished height? Use a level on top of your stacks to check levels etc. Little bit more adhesive under one or two if you need one raising less than the thickness of a tile?

Surely that's free and as quick?

 

[LM]

Put screws into the floor at intervals the same disfance apart a your level, say six feet. Very easy to adjust accurately and not easily kicked over or bent if stood on like those levelling pins

 

[Kyle Knowles]

I use the screw method at the moment on wood but stickin them things down and snipping them off would save loads of time on concrete

 

[Kyle Knowles]

I've also used the tile method on concrete but I wanna give these pins a whirl

 

[White Room]

Why not use these


Genesis Easy Level System Straps 200pcs 664
£25.00

 

[Kyle Knowles]

Nice idea but there not self adhesive

 

[White Room]

Use a bit adhesive or stixal would work well...

 

[Kyle Knowles]

Yeah it would be spot on could go even cheaper and use cable ties sat in a dot of panel adhesive but then it's drying time so the leveling don't wash them away where as them pins are self adhesive quick easy just need to get the price down on some

 

[Time's Ran Out]

The Vase Competition Winner has the best way!