Herringbone pattern !!

[Wishiwasatoptiler]

What was the size of the room batiling and roughly how long did it take for setting out and then to tile asuming the prep was done before hand. Be good as a guide if or when ever i come across a job with this set or anyone else on the forum.

 

[batiling]

It’s was 45m2 it took me just short of a day to lay and set out the room it had bi fold doors at the end so tried to use them as the straight edge of the room It took 5 days to tile as there were a few levelling issues in one corner

 

[batiling]

Tiles were 900x200

 

[Time's Ran Out]

Did this in 2009 - all tiles hand cut from larger format (3 from each tile) mixed and laid in herringbone to pick up vein in marble bath feature panel
Pattern followed into floor in wet area opposite bath wall and around internal walls. Needs a bit of a spring clean but still looking ahead of its time.

 

[Perry]

Who done that for you John?

 

[batiling]

Quality job I bet that took a while to do

 

[Time's Ran Out]

Quality job I bet that took a while to do

Still doing their work now!
5 penthouse apartments in London to start.

 

[Perry]

The first ever tiling I done was a herringbone floor. Which ended up starting my tiling career.

 

[JP Tiling]

We have got a large scheme to do in Herringbone...whats peoples thoughts on the additional time it takes as opposed to standard bond. Tiles are 300x100mm ceramics so not to hard to manage, but I am sure we can **** it up if we really try!
Any pointers on the above would be handy....

 

[Time's Ran Out]

Get yourself a cross line laser level cause it’s always 90degrees.