Has anyone got a proxxon kgs 80 for cutting trims - Tile Advice

[Boggs]

I bought a evolution chop saw and stand with a multi function blade (around £120 from Screwfix) if you have the room to set it up for the duration of the job it’s great as it cuts everything and leaves a great mitre View attachment 111935

Just got to mind the old digits!

 

[Geoff Thacker]

Just got to mind the old digits!

😂 aye it can give you a wee shock occasionally

 

[acaciaguy]

What blades are you guys using to cut metal trim. I have heard of people using fibre disks. I’m struggling to find blades with more than 64 teeth or the fibre disks. Any good sources ?

 

[Steve6690]

Cut off/mitre saw KGS 80

Cut off/mitre saw KGS 80

www.hobbytools-direct.com

 

[acaciaguy]

Thank you very much Steve. Any idea of the finish the fibre disk gives on metal trim?

 

[Steve6690]

The last trim I cut with them was Schluter Schiene stainless steel. Cut perfectly but you have to take it slow or the trim heats up.

 

[acaciaguy]

The last trim I cut with them was Schluter Schiene stainless steel. Cut perfectly but you have to take it slow or the trim heats up.

thank you. Much appreciated. Will order some now. Have a great day.