Cleaning and sealing a marble sink prior to installation - Tile Advice

[Carrie]

We have a marble sink purchased from mandarin stone. Does anyone know the best cleaning products to use prior to sealing and installation?

Any ideas on sealants would also be welcome.

Thanks for taking the time!

 

[Dumbo]

Really quite poor that you weren't advised on care when you purchased your sink . @Lithofin BOB is the man for this.

 

[Lithofin BOB]

Hi Carrie, from us we have a product Power clean - this can be diluted 1-20 and the sink cleaned over , leave the sink 3-4 days after this to dry fully or until all moisture has released.
after this use a suitable impregnator - we have MN stain stop.
apply saturate and remove all excess -buff fully dry
maintain after this with lithofin Easy Clean and when required -use the diluted power clean for a deeper clean or to remove salt traces.
deep clean and re-seal every 1-11/2 years to keep on top of it -

don't - leave soap or water on the top to dry out -try to remove these after every use.