heat

  1. E

    U Heat

    Do members get a promotional code on this site? if so who knows it. :thumbsup:
  2. Sean Kelly

    cracked tiles due to cooker heat.

    I’ve got a customer that had his kitchen tiled only 2 years ago. The tiles at the back of the cooker are cracked and discoloured due to the heat generated by their massive 6 ring gas cooker, and the grease from cooking. At the time he asked the tiler for epoxy grout, but the tiler just grouted...
  3. D

    Top Quality Service from U Heat

    If you want top quality service from an underfloor heating supplier just speak to Aaron from U Heat. Sun 1530 ish - Telephoned Aaron; discussed/placed order for underfloor heating and unsulation. Tue 1130 ish - Products arrive on site. Now that is excellent service. I've also had excellent...
  4. B

    Heat resistance on hearth

    Hi folks, have someone who wants a hearth tiling (quarry tiles). A pot belly stove will be on top of them. Will a Flexible rapid (or normal setting) be affected by any heat displaced from the stove. I assume it will be fine, but thought I'd check with the forum. Thanks Bob
  5. kilty55

    u heat floor heating

    hi all,has anyone on the site bought and used the u-heat underfloor heating? ive been pricing jobs with 2 main companies so far but feel i could be losing work due to the higher cost involved with buying a bigger brand,,i noticed u-heat are considerably cheaper and there insulation boards are...
  6. P

    Help - U/F heat + tile over blockboard

    Hi I've just looked at a new job. Currently the floors are carpeted in 2 bathrooms. However, the owner tells me that there is blockboard underneath. They want me to install u/f heating (I will probably use devimat) and then tile over it. My previous experience has all been on solid floors, or...
  7. P

    BAL FastFlex - is this the right adhesive on ply and for heat?

    Hi All, Tiling onto marine ply around a range heating system, the current tiles (10x20) are coming away. Apparently the adhesive used was heat resistant, yet was only put on 6 mths ago and are already coming away. There are hot pipes in one corner, closest to where the tiles are coming away...
  8. R

    Heat resistant adhesive

    I've recently been approached by a guy who fits fires/stoves and fireplaces. He's looking for me to fix tiles with him around his fire places. Does anyone else out there do work like this? Can anyone advise me whether I should be looking for a heat resistant adhesive and grout or would a...
  9. M

    Tiling over Electric heat mats

    Hi, I have a job to do tomorrow were the 1st tiler has been sacked as he laid the heat mats wrong and they now won't work. Apparently he over lapped the mats and this causes it to fail. Any hints from you guys who are old pros at laying these mats?
  10. W

    Heat resistent adhesive

    Hi I have a wood burning stove in my fireplace. It has generated a really good heat but unfortunately the surrounding plaster has blown. I want to tile the recess with large Travertine tiles but I am unsure of which adhesive to use. It has been suggested thst I use a fire cement. Can anyone...
  11. M

    What combination of latex/tile adhesive are needed in laying electric underfloor heat

    We have been given a lot of conflicting advice on laying underfloor heating and tiling. Please help! We have a floating, 22mm chipboard floor over 50mm insulation. We are going to lay 200watt heating mat, then porcelein tiles. Do we need to treat the chipboard surface? What flexible tile cement...
  12. U

    heat resistant tile adhesive??

    Got to replace some tiles which have fallen off a chipboard wall which has hot waterpipes behind, and central heating boiler in front. Any recommendations for suitable adhesive/grout. Previously used BAL CTF3, which lasted about 7 yrs, anything better around? Any advice welcome. Geoff

Advertisement

Back