Random photo from your day - TilersForums.com

[Old Mod]

Or the joint should have matched the window frame middle line and gone through the shaver point cut out and control knob?

The joint is in line with the top of the cistern boxing, as it should be.

 

[Qwerty]

Give us a clue!!! Hahaha

 

[jobdone]

Basin waste?

 

[Blunt Tool]

Ok so here’s another one for you.
Spot the mistake!

View attachment 94875

Dot n dab with green star?

 

[Old Mod]

The joint is in line with the top of the cistern boxing, as it should be.

Cheeky so & so Andy

 

[Blunt Tool]

Is it the shaving socket and wire?

 

[Tommythetiler80]

Bit wonky!

 

[Blunt Tool]

View attachment 94900 Bit wonky!

Can u not pull forward and try again?

 

[Andy Allen]

Seem to be getting all good jobs lately..

 

[Andy Allen]

@3_fall.... Is it the wire that shouldn't be there....... Looking at all the pipes it doesn't look like he's having an electric shower fitted...

 

[Old Mod]

@3_fall.... Is it the wire that shouldn't be there....... Looking at all the pipes it doesn't look like he's having an electric shower fitted...

That’s for the shaver socket inside the cabinet mate.

 

[Time's Ran Out]

@3_fall - there’s no shower head outlet!

 

[Old Mod]

@3_fall - there’s no shower head outlet!

This is the shower wall John.

 

[WetSaw]

Ok so here’s another one for you.
Spot the mistake!

You're not going to be able to open the door when the basin unit is in.

 

[Old Mod]

It’s the Rad that is behind the door.
The rad is actually in the wall kinda.
Those five round protrusions accept a conductive bar in to them, which lay parallel to the wall. So in all the whole rad only sticks out about 50-60mm.