Using Offcuts As An Accent Border...

[KateJ]

Hello! New girl here - might be tiling a little flat in Southampton.
Never tiled in my life...I have a house full of tiles, a cutter and can't wait to get started.

Thinking about an accent colour (row of mosaic/border tiles for example) could I cut some large tiles into strips and use them as a border? Is it OK to have a cut edge halfway up a wall or must they be strictly at the very top or bottom of a wall?

Kate

 

[Old Mod]

Hi and welcome to the forum Kate!
U can put cut tiles wherever u wish, they're your tiles.
Might be an idea to get a carbarundum stone or some carbarundum paper discs tho, that way u can smooth out any rough edges on the cut piece.
Remeber tho, cut tile edges are razor sharp, so protective gloves are a good idea when you're polishing the rough edges.

 

[Italy]

noooooooooooooo

welcome kate

 

[KateJ]

Oh that's so great! I've got a cutter but that's all - I'll be sure to get a carborundum (is that a real word)? stone and gloves.

You learn something every day!!
Silicon carbide (SiC), also known as carborundum /kɑːrbəˈrʌndəm/, is a compound of silicon and carbon with chemical formula SiC.

 

[Old Mod]

- I'll be sure to get a carborundum (is that a real word

That's why you're here isn't it, to learn?

 

[Italy]

That's why you're here isn't it, to learn?

@3_fall
He is the best teacher. that you can find. he also carries out. lessons at home.
cost much. but worth it.

 

[Spare Tool]

@3_fall
He is the best teacher. that you can find. he also carries out. lessons at home.
cost much. but worth it.

Italian lessons at home expensive

 

[Old Mod]

@3_fall
He is the best teacher. that you can find. he also carries out. lessons at home.
cost much. but worth it.

Antonio, you will get me in trouble one day! Haha

 

[Spare Tool]

Hello! New girl here - might be tiling a little flat in Southampton.
Never tiled in my life...I have a house full of tiles, a cutter and can't wait to get started.

Thinking about an accent colour (row of mosaic/border tiles for example) could I cut some large tiles into strips and use them as a border? Is it OK to have a cut edge halfway up a wall or must they be strictly at the very top or bottom of a wall?

Kate

You could do with setting a side stop on your cutter to get all strips same size, i'd put the cut edge facing down, presumably (unless led in the bath) you'd be looking down on the border so you'll see factory finished edges when walking in the room...just a thought

 

[KateJ]

.... and the very good thought thank you Andy with big fish!

I'll be doing underfloor heating as well but first I'll have a look with my plumber to get his advice. I'll probably be asking questions on the UFH page in due course.

Complete the sentence: 'Old tilers never die, they just.......

Kx