Discuss Which one? - DIY Kitchen Tiling Job :) in the Adhesive and Grout area at TilersForums. The USA and UK Tiling Forum (Also now Aus, Canada, ROI, and more)
This is how my window sill setup looks like if it makes any difference. The bottom picture is if I go with the line he has setup.
He said it's because it hides the fact if the worktop isnt level where as if I go with full tile from the worktop it will draw your eyes straight to it if not level...
You can choose to listen to the father in law or the folk who do this day in day out, make your life easier around the sockets also. Stick a level on your worktop if you are worried about it not being level.
Yes rule of thumb is to center with the hood as its a more focal point, providing it leaves you with good cuts into the sockets and ends. You can adjust what row is full or half tile to make the sockets easier also. That may seem obvious sorry but its not to everyone
[automerge]1570879619[/automerge]
This thread will be of some use to you also for that control panel/socket to the far right as it's a little different to your normal socket
How unlevel is your worktop . It has to be really bad . Also for your bottom row of tiles would have to be cut at an angle for that reasoning to have any value .
How unlevel is your worktop . It has to be really bad . Also for your bottom row of tiles would have to be cut at an angle for that reasoning to have any value .
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.