Using SBR primer on bitumen floor to stop smell

[Qwerty]

Im going to prime my solid concrete floors with SBR primer before tiling my en suite, but I also have the same crappy bitumen covering on my bedroom floor.

The tiles are up and left the residue, which is really smelly (hot tarmac!). Will a coat of SBR stop this, if not then what will please (we need to re-lay the underlay and carpet soon)

Cheers - Geoff

 

[White Room]

How thick is the bitumen

 

[Qwerty]

How thick is the bitumen

Very very thin (less than 1mm)

 

[DHTiling]

Very very thin (less than 1mm)

remove it...

with one of these..

Wire Brush for Angle Grinder


A very aggressive wire brush for use in an angle grinder - You will be amazed how fast this works!

Use to remove all kinds of unwanted paint, adhesive, rust and other surface contaminants etc

Very good for 'keying' smooth surfaces.

- Hardend & twisted 0.5 mm steel strands
- 75 mm Diameter
- Standard M14 thread (fits all standard angle grinders)
- Max speed 12,500 Rpm

We recommend you wear suitable eye protection overalls and gloves while using this tool



Price: £4.49 £5.16 Including VAT at 15%

 

[White Room]

My thinking is that if your getting an odour I would get it up then prime, priming might work straight onto the bitumen but if it dos'nt your'll be taking the carpet back up when it's laid.