Travertine edging - TilersForums.com

[bigmal]

Thanks everyone for excellent advice so far!

I might have to rethink based on the weight... but the Travertine really does look the dog's wotsits - and is a pretty good price compared to many "manmades'

cheers

 

[doug boardley]

Hi Mal, if you're going down the traditional plaster route on one wall, use sand and cement render and leave it unskimmed. Don't let your plasterer use a gypsum basecoat as this is unsuitable to tile onto. Another solution would be to dot and dab 12.5mm plasterboard on your wall (I'm assuming it's a masonry wall), and again, leave unskimmed

 

[mikethetile]

:welcome:good luck with thee job, you will get sound advice on here

 

[suave]

:welcome:

 

[diamondtiling]

Welcome to the forum.

 

[david campbell]

:welcome:to the forum

 

[White Room]

Hi and welcome

 

[Ken Bruty]

:welcome:

 

[Daz]

Hi & welcome.

As Dave says, the Montolit pads are a great way of finishing the edges without a great deal of expense.

 

[Scott]

:welcome: