Tiling a fibre glass shower tray

[DHTiling]

John,,are you on about the self adhesive membrane here..?...

 

[wetdec]

Its a white Impey 1800 x 900 22mm thick wet room former

Give it a rub down with some sand paper to get a key for the adhesive.. Using a powdered flexi adhesive apply around 3/4mm of adhesive over former with serrated troweland apply membrane (Dura-wp / ditra) pushing back to clear out any air bubbles. If a wood floor them membrane can be extended to whole room applied the same way.

If using tilesafe apply as above without the adhesive.


Hope this helps