tile markers?

[2mike2]

in the past I've used chinagraph pencils for marking tile for wet saw cuts - pencils are fidgety to deal with. Any other suggestions?

 

[brian c]

berol pen...(marker)

 

[LM Ceramics]

i use felt tips but i go through alot of them i tend to stand on them

 

[White Room]

Use these from tradetiler Don't lose the mark when wet and just wipes off

 

[andy-p]

scribe the line with your dry cutter first then run a berol marker or pencil over the scribe line and hey presto it sticks out luverly...

 

[DHTiling]

http://www.tilersforums.com/tiling-forum/5173-what-do-you-use-mark-your.html


have a read of this also....

 

[doug boardley]

same as andy p, sometimes use boys' wax crayons,

 

[doug boardley]

just wondering if you put a strip of masking tape over tile, marked it, would tape stay on long enough to run trough wet saw? or am I gonna get a load of:stupid:icons1

 

[2mike2]

Thank you all for the replies.
whitebeam, can you sharpen a very narrow line on the tile trader marker?
dave, read what?

 

[Dan]

Mike,

Dave wants you to read THIS - CLICK HERE. (he did post that link)

And yes, you can sharpen the tradetiler markers to a fine point.