primer peeling

[chequers]

Ok applied pr360 primer in three coats .first few tiles have been laid .the primer is peeling off this morning whilst picking the adhesive snobs that have squirmed out on the floor .its like a skin .not a good start . The tiles are large and it is s anhydrate floor .what will happen in the future a with the tiles or b if there is a small missed peel

 

[The D]

what sub floor is it??

 

[Brinkley]

did you allow the primer to puddle sounds like too much primer applied

 

[The D]

Did you dilute the pr360??

 

[Andy Allen]

did you remove the latience...

 

[chequers]

Hi yeah put a thick coat on .expected it to soak in .it has dried and is stable as long as you don't run anything sharp on it .it is anhydrate .the pr360 wad diluted about 4 to 1 should I stop tiling or does this mean the tiles will lift

 

[The D]

did you sand the floor ???

 

[chequers]

Done all the right prep on the surface . But I think the coats were too thick .ok what do do now

 

[chequers]

Yeah light ended the floor

 

[Andy Allen]

did you vacum the floor after sanding..