newbie question

[asabrush]

Hi all,

I'm trying to source a large bridge saw(urgently!) Client needs a me to mitre 90cm 12mm porcelain for a set of steps.I need to be able to cut these without having to plunge cut,ie. a huge table!

Any ides would be extremely appreciated,my budget is around £1000

Thanks

 

[DHTiling]

How about one of these from tradetiler.........ideal for mitres...

Makita Power Saw (110v only)


Wet cutting hand held power saw from Makita (can be used dry with suitable blade)

• Water fed to both sides of blade

As every day goes by, tiles seem to be getting even bigger this can be a big problem when it comes to wet cutting. The traditional machines become so heavy and expensive they are not viable. With the use of a straight edge clamped on the tile/slab accurate cuts can easily be achieved.
Accurate free hand cuts can also easily be achived
Highly suited to grout raking by reducing the depth of cut

• Electrical earth leakage breaker
• Blade Diameter: 125mm - Bore: 20 mm
• (we include ring to make standard 22.2mm blades fit)
• Depth of Cut @ 90°: 40mm
• Depth of Cut @ 45°: 26mm
• No Load Speed: 12,000rpm
• Input wattage: 860w
• Net Weight: 2.9kg
• 110v only (because of water)
• 5 M water feed tube, rubber tap fitting

Included - Continuous rim blade rated for concrete - suitable some stone, travertine and marble. However we recommend a suitable tile blade is purchased separately
Blade Here



Price: £255.30 £299.98 Including VAT at 17.5%

 

[DHTiling]

OH!! Sorry and welcome to tilers forums......

 

[White Room]

Hello and welcome

 

[twinlog]

yeh welcome to the forum