Limestone tiles

UK Tiling Forum; Established 2006

Welcome to the UK Tiling Forum by TilersForums.com, built in 2006 by Tilers, run by Tilers.

View all of the UK tiling forum threads, questions and discussions here.

Tilers Forums Official Sponsors

K

kins73

Hi all, just completed mosaic floor for customer who wants me to quote for a limestone kitchen floor of 20 metres. The tiles will be laid onto boarding 18mm ply, so a flexible adhesive and grout to be used. What grout should be used and what advice for laying as this will be my first natural floor. Do i need to seal the stone prior to grouting? What product to use? I have heard talk of epoxy grouting- is this for particular jobs? Have seen people not listing this as a skill they offer-presumably because of the *** factor.
Any advice would be gladly received, newbie wanting to learn new skills, but am willing to work my bits off.
I am currently only working evenings and weekends until it kills me then when there is enough work I will jack in my engineering job and do this full time.

Kind regards

Neil:wink_smile:
 
Just to add to the already long thread, the mosaic work just finished was charged at £40 per metre, with the wall(plain white six inch) at £20 per metre plus adhesive and grout at £5 per metre.
I plan to(with the right advice) to charge around £50 per metre for the limestone plus adhesive etc.

Also what would anyone advise to charge for boarding a floor, would you charge per metre for the board or cost plus a percentage for the materials and per day labour rate?

neil
 
Hiya Neil

First the limestone, seal before grouting always, standard flexi grout is best - steer clear of epoxy. I currently use the LTP range of sealants, Ihave tried others such as HG & Lithofin. LTP in my opinion are far better, easy to use, very effective. If you phone Specialist Tiling Products in Harrogate they will post for you or advise of a nearby stockist. Limestone prices - I personally would be looking for £45.00 to £50 per metre all in.
For over-boarding a floor I usually charge a day rate plus cost of ply & screws. I have a Senco collated screw gun, cordless 18volt . This will fire in 100's of screws in a matter of minutes. Also a hand held circular saw - I still charge at a rate of £75.00 half day or £150.00 full day labour depending upon size of floor - If it takes less time then i'm quids in.
Good on ya mate for putting in the hours to get established. That's exactly what I did, then packed in my job. Have never looked back.
Regards
 

Advertisement

Thread Information

Title
Limestone tiles
Prefix
N/A
Forum
UK Tiling Forum
Start date
Last reply date
Replies
2

Advertisement

UK Tiling Forum

Thread statistics

Created
kins73,
Last reply from
Leatherface,
Replies
2
Views
2,983

Thread statistics

Created
kins73,
Last reply from
Leatherface,
Replies
2
Views
2,983
Back